Gainlab Audio DICTATOR GLA-TC1 캘리브레이션 매뉴얼 - 페이지 9

{카테고리_이름} Gainlab Audio DICTATOR GLA-TC1에 대한 캘리브레이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainlab Audio DICTATOR GLA-TC1 18 페이지.

Now go back to 3.1 and check if in Bypass mode you still measure 0V in between TP1 and TP2.

Most likely it will stay as you set up earlier. Repeat 3.1 and 3.2 if needed.

3.3 Bypass measurement (Right channel)

Switch Mode to Bypass.

Measurement process: Measure voltage between TP4 and TP5

points

Adjust: VR4

Target: to see 0V on volt meter

Error margin: 0.1V

3.4 Hicomp measurement (Right channel)

Switch Mode to HiComp.

Measurement process: Measure voltage between TP4 and TP5

Adjust: VR10

Target: to see 0V on volt meter

Error margin: 0.1V