Gree 13-04710 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Gree 13-04710에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree 13-04710 18 페이지. Window air conditioner

INSTALLATION INSTRUCTIONS

Remove packaging materials

Remove and properly dispose of packaging

materials. Remove tape and glue residue from

surfaces before turning on the air conditioner.

Rub a small amount of liquid dish soap over the

adhesive with your fingers. Wipe with warm

water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to

remove tape or glue. These products can damage the surface of your air conditioner.

Handle air conditioner with care.

IMPORTANT : DO NOT DRILL ANY HOLE AT THE BOTTOM OF THE UNIT OR WARRAN-

TY WILL BE VOID. WATER IS USED TO COOL DOWN HOT PARTS OF THE UNIT.

1-WINDOW REQUIREMENTS

These instructions are for a standard double-hung window. You will need to modify them for

other types of windows.

The air conditioner can be installed without the accordion panels if needed to fit in a narrow

window. See the window opening dimensions.

All supporting parts must be secured to firm wood, masonry or metal.

The electrical outlet must be within reach of the power cord.

Follow the dimensions in the table and illustration for your model.

Models

13-04588

13-04590,13-04591

13-04592

Excessive Weight Hazard

Use two or more people to move and

install air conditioner.

Failure to do so can result in back or

other injury.

12 1/2"min.

23" - 38"

13 1/2"min.

21" - 38 1/8"

(With accordion panels)

WARNING