Gainlab Audio EMPRESS GL-PEQ 매뉴얼 - 페이지 6

{카테고리_이름} Gainlab Audio EMPRESS GL-PEQ에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainlab Audio EMPRESS GL-PEQ 14 페이지. 2x3 band tube equalizer

LOW FREQUENCY BAND

frequency using the FREQ (Hz) switch. Use the LOW BOOST (dB) parameter to set

the amount of increase. Use the LOW CUT (dB) parameter to set the cut rate.

BOOST SHIFT

In connection with simultaneous cutting and bosting, the BOOST

SHIFT function has been added to the device, which is able to shift

the boosted frequency proportionally to the cutting frequency

during operation, enriching the process of creating a complex

transmission curve with additional possibilities. To turn on the

function, set the switch to the down position. To deactivate the

function, set the switch to the upper position. Attention! The degree of frequency

shift depends on the selected frequency!

2X3 BAND TUBE EQUALIZER

One of the features of the ﬁlter

networks is that the device is able to

cut and boost at the selected

frequency at the same time, thus can

realizing complex transmission

characteristics. To boost, select the

desired frequency using the FREQ (Hz)

switc h. Set t he LOW CU T (dB)

parameter to OFF (0). Use the LOW

BOOST (dB) parameter to adjust the

amount of increase.

To cut, select the desired frequency

using the FREQ (Hz) switch. Set the

LOW BOOST (dB) parameter to OFF

(0). Use the LOW CUT (dB) parameter

to set the cut rate. For complex

transmission curve. select the desired

! 5