Gainlab Audio EMPRESS GL-PEQ 매뉴얼 - 페이지 8

{카테고리_이름} Gainlab Audio EMPRESS GL-PEQ에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainlab Audio EMPRESS GL-PEQ 14 페이지. 2x3 band tube equalizer

HIGH FREQUENCY BAND

frequency using the FREQ (Hz) switch. Use the HIGH BOOST (dB) parameter to

adjust the amount of increase. Use the HIGH CUT (dB) parameter to set the cut

rate.

CUT SHIFT

In connection with simultaneous cutting and boosting, the CUT

SHIFT function has been added to the device, which is able to shift

the cutting frequency in proportion to the boosting frequency

during operation, enriching the process of creating a complex

transmission curve with additional possibilities. To turn on the

function, set the switch to the down position. To deactivate the function, set the

switch to the upper position. Attention! The degree of frequency shift depends on

the selected frequency!

2X3 BAND TUBE EQUALIZER

One of the features of the ﬁlter

networks, the device is able to cut

and boost at the selected frequency

at the same time, thus realizing

complex transmission characteristics.

To b o o s t , s e l e c t t h e d e s i r e d

frequency using the FREQ (Hz) switch.

Set the HIGH CUT (dB) parameter to

OFF (0). Use the HIGH BOOST (dB)

parameter to adjust the amount of

increase.

To cut, select the desired frequency

using the FREQ (Hz) switch. Set the

HIGH BOOST (dB) parameter to OFF

(0). Use the HIGH CUT (dB) parameter

to set the cut rate. For complex

transmission curve. select the desired

! 7