Gainlab Audio BISHOP 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Gainlab Audio BISHOP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainlab Audio BISHOP 10 페이지.
Gainlab Audio BISHOP에 대해서도 마찬가지입니다: 매뉴얼 (15 페이지)
페이지 인쇄
PREAMP AUX.
PREAMP SECTION
TONE CONTROL SECTION
INPUT SELECTION
DYNAMICS SECTION
INTRODUCTION
In
The
BISHOP All Tube Channel Strip
is a
fully symmetrically
designed
recording channel with an All Tube system, featuring a
two-stage
amplification,
dynamic processing,
and
tone control
options.
Symmetrical in nature, it does not asymmetrically alter the received
balanced signal. All Tube implies that only electronic tubes are involved
in the amplification process. It's two-stage because it can engage a
secondary stage alongside the main amplification stage for greater gain
if desired. It is equipped with a
dual slope optical compressor,
each with
individually adjustable threshold points. It features a
two-position AIR
band
switch capable of emphasizing high frequencies. When combined
with the dynamics control, it can achieve all of this within the context of
the audio material. As the gain reduction on the compressor increases, a
corresponding boost occurs in the high frequencies.
PREAMP SECTION
Ps
The main control element of the
preamp section is the dual gain
selector knob located on the left
side of the VU meter. This knob
regulates the preamp gain and
facilitates switching between the
different preamp stages. The internal
scale, which we refer to as the
Low