Automation Networks ANC-120e 사용자 설명서 - 페이지 13

{카테고리_이름} Automation Networks ANC-120e에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Automation Networks ANC-120e 18 페이지. Compact usb to data highway plus adapter
Automation Networks ANC-120e에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지)

Automation Networks ANC-120e 사용자 설명서
ANC-120e
USB to DH+ Adapter

Firmware Upgrade

IMPORTANT: Only upgrade the firmware with the firmware image provided by Automation
Networks Inc. support staff and only when it is necessary to do so.
Make sure that the unit is disconnected from the DH+ network by unplugging the cable from the unit
before proceeding with the firmware upgrade.
1. Open any web browser and enter the ANC-120e IP address in the address bar, default IP
address of the device is set to "192.168.137.2"
2. Enter the username and password in the corresponding fields, by default, the username is set
to "admin" and password is set to "password"
3.
Click "OK" button
4. If you entered the correct login credentials, you will be presented with the main configuration
window
5. Navigate to the "Upgrade Firmware" tab
6. Click on the "Upgrade" Button
7.
Wait approximately 5 seconds until the device reboots into firmware upgrade mode
©Automation Network Inc. 2016
User Manual 13