Automation Networks ANC-120e Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Адаптер Automation Networks ANC-120e. Automation Networks ANC-120e 18 страниц. Compact usb to data highway plus adapter
Также для Automation Networks ANC-120e: Руководство (4 страниц)

Печатать страницу

ANC-120e

USB to DH+ Adapter

Firmware Upgrade

IMPORTANT: Only upgrade the firmware with the firmware image provided by Automation

Networks Inc. support staff and only when it is necessary to do so.

Make sure that the unit is disconnected from the DH+ network by unplugging the cable from the unit

before proceeding with the firmware upgrade.

1. Open any web browser and enter the ANC-120e IP address in the address bar, default IP

address of the device is set to "192.168.137.2"

2. Enter the username and password in the corresponding fields, by default, the username is set

to "admin" and password is set to "password"

Click "OK" button

4. If you entered the correct login credentials, you will be presented with the main configuration

window

5. Navigate to the "Upgrade Firmware" tab

6. Click on the "Upgrade" Button

Wait approximately 5 seconds until the device reboots into firmware upgrade mode

User Manual 13