Automation Networks Highway Plus ANC-100e 사용자 설명서 - 페이지 12

{카테고리_이름} Automation Networks Highway Plus ANC-100e에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Automation Networks Highway Plus ANC-100e 19 페이지. Ethernet to data adapter

페이지 인쇄

1. Configuration and Interface

ANC-100e

Ethernet to DH+ Adapter

9. If the valid firmware image already programmed, ANC-100e detects it and informs the used by

displaying "Software Detected" label

10. Enter the same current password

11. Click on the "Erase" button to erase the currently programmed firmware. This step is

mandatory before programming a new firmware into the device

12. Wait for the device to erase the internal memory and show the following confirmation page:

13. Click on the "Return" button to return to the previous screen. IMPORTANT: Do not use the

web browser Back button to navigate between pages

14. You will notice that the device confirms that there is no valid firmware image anymore with the

label "NO Application SW Preset"

15. Click on the "Browse" button and select the firmware upgrade file provided to you by our

support staff

16. Click on the "Upload" button to start the FW upgrade process

17. Wait for the confirmation page to display the result of the upgrade operation:

18. Wait 10 seconds and press the "Return" button to access the device configuration interface

•

Firmware upgrades will ensure that all the currently configured device settings are preserved

and there is no need to reconfigure the device after the firmware upgrade.

User Manual 12