Automation Networks Highway Plus ANC-100e Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor Automation Networks Highway Plus ANC-100e. Automation Networks Highway Plus ANC-100e 19 halaman. Ethernet to data adapter
Halaman CetakANC-100e
Ethernet to DH+ Adapter
9. If the valid firmware image already programmed, ANC-100e detects it and informs the used by
displaying "Software Detected" label
10. Enter the same current password
11. Click on the "Erase" button to erase the currently programmed firmware. This step is
mandatory before programming a new firmware into the device
12. Wait for the device to erase the internal memory and show the following confirmation page:
13. Click on the "Return" button to return to the previous screen. IMPORTANT: Do not use the
web browser Back button to navigate between pages
14. You will notice that the device confirms that there is no valid firmware image anymore with the
label "NO Application SW Preset"
15. Click on the "Browse" button and select the firmware upgrade file provided to you by our
support staff
16. Click on the "Upload" button to start the FW upgrade process
17. Wait for the confirmation page to display the result of the upgrade operation:
18. Wait 10 seconds and press the "Return" button to access the device configuration interface
•
Firmware upgrades will ensure that all the currently configured device settings are preserved
and there is no need to reconfigure the device after the firmware upgrade.
©Automation Networks & Solutions LLC. 2016
User Manual 12