DynaLock 3000LC Series 설치 지침 매뉴얼 - 페이지 3
{카테고리_이름} DynaLock 3000LC Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaLock 3000LC Series 12 페이지. Electromagnetic lock
DynaLock 3000LC Series에 대해서도 마찬가지입니다: 설치 지침 (4 페이지), 매뉴얼 (6 페이지)
페이지 인쇄
DynaLock
705 Emmett Street
Ph/ 860.582.4761
Using the two lock mounting screws and
brass spacers attach the lock assembly to
the lock mounting bracket as shown. The
lock assembly will need to be removed later
to add the remaining bracket mounting
screws, after all hardware adjustments have
been made.
Firmly tighten the mounting screws with a
3/16" hex wrench.
ATTACH THE ARMATURES TO THE ARMATURE MOUNTING BRACKETS
Locate the armature mounting hardware
from the hardware kit and attach the
armatures to the armature mounting bracket
as shown. Firmly tighten the mounting
screws with a 3/16" hex wrench.
Failure to properly secure the armatures
to the brackets could result in serious
injury or possible security breach.
3001xTJ31 MANUAL - FORM 3001TJ-001
Bristol, CT 06010
?
Fx/ 860.585.0338
?
ASSEMBLE THE ARMATURE MOUNTING BRACKET
SERIES 3001xTJ31
ELECTROMAGNETIC LOCK
INSTALLATION INSTRUCTIONS
BRACKET ASSEMBLY SCREW
LOCK WASHER
LOWER ARMATURE BRACKET
FLAT STEEL WASHER
RUBBER WASHER
ARMATURE SPACER
ARMATURE
MOUNTING
SCREW
ARMATURE MOUNTING BRACKET
Page 3
UPPER ARMATURE BRACKET
11/02