Gainsborough K244 조립 지침/사용 지침 - 페이지 2

{카테고리_이름} Gainsborough K244에 대한 조립 지침/사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainsborough K244 4 페이지. Set 4 bronze lawn edging with solar lights

Set 4 Bronze Lawn Edging with Solar Lights

Please read and retain these instructions for future reference

3. Set "ON/OFF" button to "ON"

position for steady on light, press the

"MODE" button to activate flash light

function. If you like to go back to

steady on light, then press "MODE"

button again to deactivate flash light.

NOTE: In order to verify that the button

is correctly in the "ON" position, cover

the solar panel with your hand and the

light should turn "ON" automatically.

TROUBLESHOOTING

Make sure the button is set to "ON" position and keep the solar panel clean. If solar product does not light

up after it has been used for around 8 – 12 months, replace the rechargeable batteries as they may be weak

or worn out. (Battery 1pc "AA" 1.2V 300mAh, Ni-MH, Rechargeable– Same equivalent type as recommended

must be used).

BATTERY REPLACEMENT

Step1: Unscrew the battery compartment cover by using a Phillips

head screwdriver (not included).

Step2: Remove the exhausted battery and install 1pc new AA

rechargeable battery according to the +/- symbol polarity

indicated on the battery compartment. Open the compartment

carefully and ensure that welding wires inside the battery

terminals are not damaged.

Step3: Replace battery compartment cover, screw it back into

position and ensure is properly sealed.

ASSEMBLY INSTRUCTIONS

To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden

stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first

then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the

ornament housing containing the actual LED light.

Instructions for Use

K244

v002:17/01/22