Gainsborough K244 Instrukcje montażu/instrukcje użytkowania - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje montażu/instrukcje użytkowania dla Oświetlenie zewnętrzne Gainsborough K244. Gainsborough K244 4 stron. Set 4 bronze lawn edging with solar lights
Drukuj stronęSet 4 Bronze Lawn Edging with Solar Lights
Please read and retain these instructions for future reference
3. Set "ON/OFF" button to "ON"
position for steady on light, press the
"MODE" button to activate flash light
function. If you like to go back to
steady on light, then press "MODE"
button again to deactivate flash light.
NOTE: In order to verify that the button
is correctly in the "ON" position, cover
the solar panel with your hand and the
light should turn "ON" automatically.
TROUBLESHOOTING
Make sure the button is set to "ON" position and keep the solar panel clean. If solar product does not light
up after it has been used for around 8 – 12 months, replace the rechargeable batteries as they may be weak
or worn out. (Battery 1pc "AA" 1.2V 300mAh, Ni-MH, Rechargeable– Same equivalent type as recommended
must be used).
BATTERY REPLACEMENT
Step1: Unscrew the battery compartment cover by using a Phillips
head screwdriver (not included).
Step2: Remove the exhausted battery and install 1pc new AA
rechargeable battery according to the +/- symbol polarity
indicated on the battery compartment. Open the compartment
carefully and ensure that welding wires inside the battery
terminals are not damaged.
Step3: Replace battery compartment cover, screw it back into
position and ensure is properly sealed.
ASSEMBLY INSTRUCTIONS
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.
Instructions for Use
K244
v002:17/01/22