Hideawaybeds alpha bed SBF 조립 지침 매뉴얼 - 페이지 15

{카테고리_이름} Hideawaybeds alpha bed SBF에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hideawaybeds alpha bed SBF 18 페이지. Steel bed frame

STEP 8: Install Handles - Legs - Mechanism Covers - Mattress

Position and secure handles for ease of operation. Measure down approximately 36"

(914mm) from the panel top to the top of the handles.

Install legs with the washers on the inside of the Rails and the Nylon washer on the

outside. Tighten nut to have a small amount of friction when leg assembly is rotated

from the up to down position.

Steel Filler Washer

Steel Holding Washer

Nylock Nut

Leg Assembly

Install leg connector rod between legs and secure with 1/4"x1 1/4" (M4x32mm) Hex

head bolts and star washers. Be sure they are securely tightened so not to become

loose.

Install the mattress and secure with previously installed Nylon Straps.

Snap the powder coated steel mechanism covers in place - secure with #8x1 1/4"

(M4x32mm) black wood screws through the standoff on the backer plate.

Drawing 16.

Leg

Nylon Washer

Steel Frame

Bed Closed Position

Bed Face Panel

Floor

1/4"-20 x 1 1/4" Bolt

Star Washer

Drawing 17.

Leg Stop

1 3/8" (35mm)

O.C. Leg Pivot Hole

Bed Open Position

Drawing 18.

Steel Leg

Steel Leg Rod

Rubber Foot