Hideawaybeds alpha bed SBF Інструкція з монтажу Посібник з монтажу - Сторінка 15
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень Hideawaybeds alpha bed SBF. Hideawaybeds alpha bed SBF 18 сторінок. Steel bed frame
Друкувати сторінкуSTEP 8: Install Handles - Legs - Mechanism Covers - Mattress
1.
Position and secure handles for ease of operation. Measure down approximately 36"
(914mm) from the panel top to the top of the handles.
2.
Install legs with the washers on the inside of the Rails and the Nylon washer on the
outside. Tighten nut to have a small amount of friction when leg assembly is rotated
from the up to down position.
Steel Filler Washer
Steel Holding Washer
Nylock Nut
Leg Assembly
3.
Install leg connector rod between legs and secure with 1/4"x1 1/4" (M4x32mm) Hex
head bolts and star washers. Be sure they are securely tightened so not to become
loose.
4.
Install the mattress and secure with previously installed Nylon Straps.
5.
Snap the powder coated steel mechanism covers in place - secure with #8x1 1/4"
(M4x32mm) black wood screws through the standoff on the backer plate.
Drawing 16.
Leg
Nylon Washer
Steel Frame
Bed Closed Position
Bed Face Panel
Floor
1/4"-20 x 1 1/4" Bolt
Star Washer
Drawing 17.
Leg Stop
1 3/8" (35mm)
O.C. Leg Pivot Hole
Bed Open Position
Drawing 18.
Steel Leg
Steel Leg Rod
Rubber Foot
15