Celestron POWERSEEKER 80 EQ 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} Celestron POWERSEEKER 80 EQ에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron POWERSEEKER 80 EQ 10 페이지. Celestron power seeker telescope instruction manual eq 80
Celestron POWERSEEKER 80 EQ에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

Quick Set-up Guide [cont]

Locate the counterweight bar and counterweight. Slide the

counterweight half way down the counterweight bar and

tighten the knob to secure in place.

The longer cable should attach to the Right Ascension axis

and the shorter cable attaches to the Declination axis –

tighten screw to secure in place.

Reattach both knobs and tighten to secure in place. The front

of the tube should be positioned over the counterweight

assembly.

Loosen the set screws on the focuser so that they do not

obstruct the inner diameter of the focuser. Insert diagonal

into the focuser and tighten the set screw.

For additional magnification, you can use the included 3x

barlow. Place the barlow in the focuser in place of the

eyepiece – remove the cap from the barlow.

Thread the threaded end of the counterweight bar into the

Dec axis of the equatorial mount.

Before mounting the tube, remove the two knobs on the

tube.

Locate the finderscope and remove plastic caps on front and

back of lens. Remove the knurled nuts at the focuser end of

the telescope tube.

Remove cap and insert the 20mm eyepiece into the diagonal

and tighten the set screw.

Place the eyepiece into the barlow and tighten the set screw

to secure in place.

Slide the chrome end of the slow motion control cable onto

equatorial mount gear shaft and tighten screw to secure in

place.

Place the tube on the mount by lining up the screws with the

mounting holes on the mount.

Orient the finderscope so that the glass window is facing

towards the front of the tube. Place finderscope over the

holes on the tube and replace the knurled nuts to secure.

Remove the lens cap from the front of the telescope. To

observe, look through the eyepiece as shown above.

For detailed usage

information please

consult your owner's

manual.