AutomationDirect IronHorse GSDA-AI-A8 사용자 설명서 - 페이지 6

{카테고리_이름} AutomationDirect IronHorse GSDA-AI-A8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AutomationDirect IronHorse GSDA-AI-A8 12 페이지. Analog module

Installing the GSDA-AI-A8 in Slot 100 or Slot 200 of the GSD8 Drive

SLOT 100

SLOT 500

SLOT 200

NOTE: THE GSDA-AI-A8 MAY BE INSTALLED IN SLOT 100 or 200.

Also, the GSDA-AI-A8 comes with Default Values that allow a simple checkout procedure to verify that

everything is connected correctly and functioning. See the GSDA-AI-A8 Software Parameter Table for

further details.

When the GSDA-AI-A8 is first installed and power applied, the following message will appear on the

display:

"Configuration Change--Card in slot 200 is not in stored configuration--Up button to store

factory defaults...dn button to ignore card."

If the Up button is pushed, the factory settings will be installed and the card will be initialized. If the

Down button is pushed, the factory settings will NOT be installed and the card will NOT be initialized.

The option to install the card will appear every time power is applied to the GSD8 drive until the card

is configured or removed.

IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019

Page 6