AutomationDirect IronHorse GSDA-AI-A8 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Jednostka sterująca AutomationDirect IronHorse GSDA-AI-A8. AutomationDirect IronHorse GSDA-AI-A8 12 stron. Analog module
Drukuj stronę
Installing the GSDA-AI-A8 in Slot 100 or Slot 200 of the GSD8 Drive
SLOT 100
SLOT 500
SLOT 200
NOTE: THE GSDA-AI-A8 MAY BE INSTALLED IN SLOT 100 or 200.
Also, the GSDA-AI-A8 comes with Default Values that allow a simple checkout procedure to verify that
everything is connected correctly and functioning. See the GSDA-AI-A8 Software Parameter Table for
further details.
When the GSDA-AI-A8 is first installed and power applied, the following message will appear on the
display:
"Configuration Change--Card in slot 200 is not in stored configuration--Up button to store
factory defaults...dn button to ignore card."
If the Up button is pushed, the factory settings will be installed and the card will be initialized. If the
Down button is pushed, the factory settings will NOT be installed and the card will NOT be initialized.
The option to install the card will appear every time power is applied to the GSD8 drive until the card
is configured or removed.
IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019
Page 6