DB Research EUPHORIA EPS8 사용자 설명서 - 페이지 4

{카테고리_이름} DB Research EUPHORIA EPS8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DB Research EUPHORIA EPS8 8 페이지. 8-inch low profile amplified subwoofer

Power Connections

Connect the ground terminal to the closest point on the chassis of the vehicle.

Keep this ground wire to less than 12" (30.5 cm) in length. Use 8 gauge

(or heavier) wire.

Connect the remote terminal to the remote output of head unit using 16 gauge

( or heavier ) wire.

Connect an fuse holder within 18" (45 cm) of the car battery, and run 8 gauge

(or heavier) cable from this fuse to the amplifier location. Then connect the fuse

holder to the "BATT+" (+12V) connection on the subwoofer rear panel.

Fig.3

NOTE: In this connection, the

AUTO POWER ON switch is

in the ON position.

Fig.4

NOTE: In this connection, the

AUTO POWER ON switch is

in the OFF position.

Chassis

ground

point

Chassis

ground

point

Battery

FUSE

Battery

FUSE

to REMOTE TURN-ON

terminal of head unit