Airdog X5 사용자 설명서 - 페이지 6

{카테고리_이름} Airdog X5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Airdog X5 8 페이지.
Airdog X5에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 매뉴얼 (8 페이지)

Airdog X5 사용자 설명서
Full Cleaning Cycle
1. We recommend a complete cleaning every 6-12 months.
2. First, turn the power off and unplug the power supply. Open the back
shroud. Pull out the ionization wire frame and collecting plates. Pull
out the protective rubber sleeve as illustrated in (Pic 1).
3. Clean the ionization wire frame and collecting plates properly
according to the previous instructions.
4. Use a wet cloth to wipe down all surfaces of the protective rubber
sleeve, including notches. For better results, wash the entire rubber
sleeve in water.
5. Clean the inner walls of the air purifier with a wet cloth.
6. Wash the pre-filter in water, or clean it by a vacuum or gentle brush.
7. Dry the parts completely, then put them back in order.
Catalytic Layer
The composite filter is composed of a composite catalyst and active carbon. In principle,
the catalyst is not involved in the reaction and should not be changed. However, the
catalytic effect will decrease if the catalyst becomes coated with dust, odor or
moisture. Protect this composite filter and help extend the catalytic life by using the
provided cover whenever it is not powered up or plugged in. A periodic "sunbath" in direct
outdoor sunlight for 1-2 hours may also help to reduce moisture build up and reactivate
the catalytic effect.
The shelf life of the composite filter depends on how much you use the purifier. Change
the composite every year or two, or whenever you notice a significant decrease in the
purifier's ability to remove odors from the air.
Note:
Always turn off the power and unplug the unit before doing any cleaning or maintenance.
APP Setting (Optional)
APP Setting - If your X5 has built-in WiFi. If not, the APP info will not be applicable.
Please keep your Wi-Fi on and make sure it is in 2.4GHZ to help you finish your App setting.
Note: App is not required in order for your product to function.
iOS
Scan to download
Open App
Use email address to set up an account
Click "+" on top right corner
Press "WiFi" button on remote
Start to pair
Done
For more details, please check the Airdog Youtube channel for video instructions.
Android
Scan to download
Select model
Enter WiFi name & password
If failed, please keep the device live for
at least 5 minutes, and try again