Hidro-Water ATHENEA 매뉴얼 - 페이지 9

{카테고리_이름} Hidro-Water ATHENEA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hidro-Water ATHENEA 16 페이지.

6.1.- Procedure for replacing cartridges and the membrane.

a. Close the water supply brass ball valve (Figure-5).

b. Open the faucet (figure 2) to relieve the pressure from inside the os-

mosis system.

c. To change any of the cartridges and/or membrane they must be

turned clock-wise and pulled downwards to remove it from its cap as

indicated in the follow-ing figure. This process must be carried out for

each of the cartridges that you want to replace.

d. Remove the cartridges/membrane from their original packaging.

Each car-tridge and/or membrane must be placed in the correspond-

ing position main-taining the correct order. To do so, you must insert

each cartridge in its cap and turn it anti-clockwise. This process must

be carried out for each of the car-tridges that you want to replace.

ref: MA-UF-0002-EN-V14.0-ATHENEA.pdf