Celestron CPC 925 사용자 설명서

{카테고리_이름} Celestron CPC 925에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron CPC 925 14 페이지. Nexstar hand control
Celestron CPC 925에 대해서도 마찬가지입니다: 통신 프로토콜 매뉴얼 (8 페이지)

페이지 인쇄

BAS – Celestron CPC 9.25 Telescope User Guide

This is a brief guide to setting-up and observing with the Celestron CPC 925 Schmitt Cassegrain

telescope.

The Safety of You and the Telescope

The telescope is very heavy. And, its storage box is very heavy and awkward to lift and place into (or

remove from) vehicles.

BAS strongly recommended any lifting of the telescope and its storage box be performed by two

people. Also, the removal of the telescope from the box and placement on the tripod should only be

attempted by two people.

The storage box has wheels and detachable "wheel barrow" handles for easier movement. Or, the

simple rope handle can be substituted for the wheel barrow handles.

Telescope Components

To use the telescope, you will need:

•

CPC 9.25 telescope

•

Tripod and center support bracket

•

Hand controller

•

Charged 12v battery and telescope power cable

•

Finderscope

•

Visual back and diagonal mirror eyepiece holder

•

Eyepieces

•

A planetarium app (SkySafari or similar app) on a mobile device is also recommended

•

Dew shield

Setting Up the telescope

Tripod and attaching the telescope

Place the tripod on firm ground and fully spread the legs. Adjust the length of one, or more, legs if

necessary to level the tripod top. Use the bubble level in the tripod top as the levelling guide.

Ensure the tripod positioning pin is poking up above the top of the tripod (this pin is used to initially

center the telescope on the tripod top).

Before attempting to lift the telescope into place, make sure the optical tube is pointed in the

downward position aiming at the telescope base (where all the electronics attachment sockets are).