Celestron NexStar+ Hand Control 문제 해결 매뉴얼 - 페이지 4

{카테고리_이름} Celestron NexStar+ Hand Control에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron NexStar+ Hand Control 5 페이지.

Open the folder that contains the extracted CFM files and

double click the file called CFM.jar (Windows hides the .jar

file extension by default).

If the "Can't Find Main Class" error appears, you are using an

outdated version of Java, or you are running from inside the

compressed archive. If you don't see anything when you start

CFM, or you see the splash screen for just a moment before

it quits, you have an outdated version of Java.

CFM will open and automatically seek any devices connected

to the computer. Wait a few seconds, and CFM should

discover the hand control.

If CFM does not discover the hand control automatically,

check your cable connections and press "Seek Devices" in

CFM. When CFM finds the hand control, the hand control will

display "BOOT LOADER Serial Pass Through OFF. "

If the incorrect telescope model is displayed on the hand

control (Problem #2 above), you can fix this from the

NexStar+ menu in the top left of CFM. If the hand control

displays No Response 16/17 errors (Problem #1 above), you

can skip this step.

Select "Mount Types" from the menu, and the "Select your

telescope type" window appears.

Find your mount and click on the corresponding "Alt Az

(NXS)" box or "Equatorial (GEM)" box. Then, click on the

"Always do what I selected this time" selection at the bottom

of this window. Next, click the Select box at the bottom of the

window to confirm your selections, and the window will close.