Automotive ET3334 사용 설명서
{카테고리_이름} Automotive ET3334에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Automotive ET3334 4 페이지. Circuit tracer
페이지 인쇄Automotive Circuit Tracer
1. INTRODUCTION
This auto circuit tracer aids with locating short & open circuits, as well as identifying individual
wires in the wiring harness. For use on DC circuits ONLY. Battery powered for easy use in hard
to reach areas.
2. CAUTION BEFORE OPERATION
● Use with DC voltage only.
● DC voltage must not exceed 42V.
● You must NOT connect with AC voltage.
● Do not connect to the ignition circuit / system.
● Do not connect with pulse sensitive circuits like air bag, electronic control modules, etc.
● Please read the vehicle's service manual before operation.
● Please switch on the transmitter before connecting to any circuit.
3. SPECIFICATIONS
Ambient operating range
Relative humidity
Storage temperature
Power supply
Weight / Dimensions (Body)
(Not including battery)
ET3334 Circuit Tracer Instructions
Fault Finder Transmitter
Specifications
0°C to 40°C (32°F to 104°F)
10-95% RH noncondensing, @ up to 30°C (86°F)
-20°C to 60°C ,≤ 85%RH, without battery
9V Battery
Transmitter
Receiver
Fault Finder Receiver
135g, 150*68*27mm
140g, 150*68*27mm
-01-