GPS Automotive ET3334のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Automotive ET3334 4 ページ。 Circuit tracer
ページを印刷するAutomotive Circuit Tracer
1. INTRODUCTION
This auto circuit tracer aids with locating short & open circuits, as well as identifying individual
wires in the wiring harness. For use on DC circuits ONLY. Battery powered for easy use in hard
to reach areas.
2. CAUTION BEFORE OPERATION
● Use with DC voltage only.
● DC voltage must not exceed 42V.
● You must NOT connect with AC voltage.
● Do not connect to the ignition circuit / system.
● Do not connect with pulse sensitive circuits like air bag, electronic control modules, etc.
● Please read the vehicle's service manual before operation.
● Please switch on the transmitter before connecting to any circuit.
3. SPECIFICATIONS
Ambient operating range
Relative humidity
Storage temperature
Power supply
Weight / Dimensions (Body)
(Not including battery)
ET3334 Circuit Tracer Instructions
Fault Finder Transmitter
Specifications
0°C to 40°C (32°F to 104°F)
10-95% RH noncondensing, @ up to 30°C (86°F)
-20°C to 60°C ,≤ 85%RH, without battery
9V Battery
Transmitter
Receiver
Fault Finder Receiver
135g, 150*68*27mm
140g, 150*68*27mm
-01-