Celexon HomeCinema CLR UST 사용 설명서 - 페이지 8

{카테고리_이름} Celexon HomeCinema CLR UST에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon HomeCinema CLR UST 12 페이지. Electric floor high contrast screen
Celexon HomeCinema CLR UST에 대해서도 마찬가지입니다: 사용 설명서 (11 페이지)

페이지 인쇄

STEP 2: FABRIC ATTACHMENT

We recommend that you carry out the following steps with a second person.

Caution: The projection screen surface is extremely sensitive! Please carry

out the installation of the projection screen surface with the utmost care. Take

care not to bend the projection screen surface and do not touch it. Use the

enclosed protective gloves (V) for mounting.

Lay the protective foam sheet (G)

on a fl at surface and secure the

corners, ideally with a few strips

of painter's masking tape to pre-

vent the underlay from rolling in.

Roll out the projection screen fa-

bric (F) centrally - The projection

side must be facing downwards.

Carefully push the tension rods

(H) into the outer tabs of the

projection screen fabric: 1x long

tension rod each for short frame

sides, 2x short tensioning rods per

long fabric side. The rods must not

be pushed through fabric one over

the other, but butt against each

other in the middle. Then lay the

previously built frame with the fl at

front side onto the centre of the

projection screen fabric.

Fig 10.

Fig 11.