Aire Spring Haven 04612 사용 설명서 - 페이지 15
{카테고리_이름} Aire Spring Haven 04612에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aire Spring Haven 04612 16 페이지.
페이지 인쇄
TROUBLESHOOTING
SYMPTOM
SOLUTION
Fan will not start
Fan Sounds Noisy
Fan Wobble
Lights shut off and
will not come back on
Fans/Light Turn On
and Off Unexpectedly
Check to make sure the wall switch is turned on.
Check circuit fuses or breakers.
Caution! Make sure the power is turned off before performing the following steps.
Remove canopy and check wire connections.
Check wall control transmitter connections (if applicable).
Note: Fan must be installed at a maximum distance of 40 feet from the transmitting unit
for proper signal transmission between the transmitting unit and the fan's receiving unit.
Allow a 24-hour "break in" period. Most noises associated with a new fan will go away
during this time.
Make sure the screws that attach the fan blade holder to the motor hub is tight.
Make sure outlet box is secured to building structure, if necessary use the wood screws
provided to further secure outlet box to joist.
Make sure hanger bracket is secure to the outlet box, screws are tight.
NOTE: All blade sets are grouped by weight. Because wood and plastic blades vary in
density, the fan may wobble even though blades are matched.
Make sure outlet box is secured to building structure, if necessary use the wood screws
provided to further secure outlet box to joist.
Make sure hanger bracket is secure to the outlet box, screws are tight.
If a Balancing kit is provided follow the instructions included with the balancing kit to
help correct any excessive wobble.
This unit is equipped with a wattage limiting device. Lamping in excess of 190 watts will
disable your ceiling fan's light kit. To reset your light kit you must turn the power off and
re lamp, keeping the wattage under 190 watts. Restore power to your ceiling fan and
continue normal operation.
This is caused by interference, Please see "Frequency interference" for steps to change
the frequency.
15