Agrisan MT 12 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Agrisan MT 12에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrisan MT 12 17 페이지.

9. What you can do, before you call

customer service:

The motor is blocked and the mill does not start:

Possible cause

Possible solution

Smeared stones

Grain is too moist – dry grain

mill was turned from coarse to fine without the mill running and berries are

jammed between stones.

mill is set too fine, turn setting to coarse and turn on mill. While running turn

towards the desired finer setting.

very hard or very small grain berries

let very small berries slowly drop into the hopper by hand

The safety switch has turned the mill off:

The mill has become hot and the switch is protecting the motor

Turn mill off and let cool for 30 minutes

Smeared stones

Grain was too moist for the setting, turn to a more coarse setting

Foreign objects in the grain

Turn adjusting knob to a more coarse setting and take out foreign objects.

(stones, rocks, dirt, nails, bee bees, staples) We suggest the use of double or

triple cleaned grain. The warranty excludes foreign objects that are introduced

into the mill.