ADEN POWERKIT GO 사용 설명서 및 조립 설명서 - 페이지 12
{카테고리_이름} ADEN POWERKIT GO에 대한 사용 설명서 및 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEN POWERKIT GO 16 페이지.
페이지 인쇄POWERKIT GO — ASSEMBLY INSTRUCTIONS
ADEN GmbH
COMMISSIONING AND BATTERY USE
On some bikes there is the possibility to mount the battery as
shown in the picture.
If you need an additional battery to double the range, just send us
a request.
Now insert the yellow plug from the motor into the battery.
The battery is switched on via the button on the front left.
It should not be switched OFF and ON too quickly.
The drive is only active approx. 5 seconds after the battery has
been switched on.
It should always be ensured that the plug between the motor unit
and the battery is firmly connected!
Before the first trip, the battery should be fully charged once.
Battery almost empty - please charge!
As soon as the battery level falls below 20%, the
motor regulates the power down.
www.aden-sports.com
EN | P. 12