8STREME 5222 Series 사용 설명서 - 페이지 4
{카테고리_이름} 8STREME 5222 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 8STREME 5222 Series 9 페이지. Above ground automatic swimming pool cleaner
8STREME 5222 Series에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지)
04 Start-up
l
4. 1 Insert the end of the floating cable into the
4. 2 Insert the end of the floating cable from
socket. Take note of the orientation of the
the transformer into the black "POWER"
plug and socket.
socket. Be careful with the direction of
Screw the nut of the floating cable firmly.
the plug.
4. 4 Tighten the black nut on the floating rotary
coupling by hand.
Page6
4. 3 Slide the cap to contact the plug of the
floating swivel union.
4. 5 Repeat the operation on the blue side
marked "POOL ROBOT" with the cable
from the robot.
4. 6 Place your power box to a midpoint between
4. 7 Place the robot in your pool and wait until it is
the two ends of your pool and at least 8 feet
completely submerged. If necessary, help it to
from the edge of the pool.
sink manually.
4. 8 Press the switch located at the top of the
box to the ON position to activate your
robot.
Page?