Dynamite DYN4060 매뉴얼

{카테고리_이름} Dynamite DYN4060에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamite DYN4060 4 페이지. Ac/dc li-po charger

AC/DC Li-Po

Thank you for purchasing the Dynamite

Charger. It' s a DC-powered charger meant only for 2–3 cell

lithium-polymer (Li-Po) battery packs and features a microchip

CPU controller with a large LED to display the charge status. It

also precisely follows standard Li-Po charger algorithms. This

programmed set of charging rules tells the charger to increase

the voltage of the Li-Po cell to 4.2V (per cell). While the voltage

is rising, the current is precisely kept at one of the preset rates

(either 500mA, 1500mA or 3500mA). Once the maximum

cell voltage is reached (at which point the battery is 80–90%

charged), the charger steadily maintains a constant voltage,

while the current decreases until terminating the charge.

AC/DC Li-Po

Features

• Switching power supply for compact AC power

• Microprocessor controlled technology provides efficient

and precise charging

• Selectable charge rate of 500mA, 1500mA and 3500mA

• Automatically detects cell count and indicates error

• LED and audible beeper indicates charging status

• Short circuit protection for both input and output

Specifications

• 110-120VAC or 12V DC-powered

• Charges 2–3 cell Li-Po packs

• Reverse polarity protection circuit

• Includes JST charge cord and Mini-T battery adapter

Charger