DBI SALA Flexiguard 8530564 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} DBI SALA Flexiguard 8530564에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DBI SALA Flexiguard 8530564 8 페이지. Concrete mounted jib base
DBI SALA Flexiguard 8530564에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지)

페이지 인쇄

Step - 3: Installing the Jib Mast into the Jib Base.

• Lower the Jib Mast until the Rotation Block (A) is resting in the Locking Slot (B) in the Jib Base. (See

Figure 4 -

IMPORTANT: Insert the Base Cap into the Jib Base when the Jib Mast is not in the Jib Base.

INSPECTION:

IMPORTANT: Extreme working conditions (harsh environments, prolonged use) may require increasing the

frequency of inspections..

WARNING: If the system has been damaged do to fall arrest, it must be immediately removed from service,

inspected, or contact Capital Safety for repair or replacement.

Before Every use:

• All fasteners must be tight, secure and not damaged.

• Inspect for corrosion or rust.

• All labels must be present and fully legible.

• Inspect for cracks around the Jib Base.

• Record results of inspection in the inspection and maintenance log provided.

• If inspection reveals an unsafe or defective condition, remove Concrete Mounted Jib Base from service

and destroy, or contact Capital Safety for repair or replacement.

Monthly:

• A formal inspection should be done by a Competent Person

inspection in the inspection and maintenance log provided.

LABELS

1 Competent Person:

One who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazard-

ous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them.

™

9511992 rev.c

other than the user. Record results of

(See Figure 4 -