Galanz P180M18ASL-A0 사용 설명서 - 페이지 15
{카테고리_이름} Galanz P180M18ASL-A0에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galanz P180M18ASL-A0 16 페이지.
페이지 인쇄
S
PLATTER SHIELD EXHAUST WINDOW FRAME CLEANING
1.
Detaching: Hold the two tabs in front of the splatter shield with your hands (as shown by the
arrows).Push the tabs following the direction of the arrows and pull downwards after you have pulled
in the tabs.
2.
Wash the splatter shield exhaust window frame, rinse, sanitize, allow to dry.
3.
Installation:
1)
Put the the exhaust window frame into the cavity.
2)
Insert the two locating pins at the rear of the exhaust window frame into the locating holes on
the rear panel of the cavity.
3)
Push the front of the exhaust window frame upward and push the lugs at the left and right sides
into the fixing holes at the left and right sides of the cavity.
F
AILURE DIAGNOSE
Failures
An error sign "E-01" display.
An error sign "E-02" display.
An error sign "E-03" display.
An error sign "E-05" display.
An error sign "E-06" display.
An error sign "E-07" display.
An error sign "E-08" display.
An error sign "E-09" display.
An error sign "E-10" display.
An error sign "E-11" display.
An error sign "FOOD" display.
An error sign "FAIL" display.
Possible reasons
VPC1 frequency conversion failure.
VPC2 frequency conversion failure.
Communication failure.
VPC1 temperature sensor open circuit alarm.
VPC1 temperature sensor short circuit alarm.
VPC2 temperature sensor open circuit alarm.
VPC2 temperature sensor short circuit alarm.
Cavity temperature sensor open circuit alarm.
Cavity temperature sensor high temperature alarm.
Cavity temperature sensor short circuit alarm.
No load high temperature alarm.
Button closed alarm.
14