Galanz P180M18ASL-A0 사용 설명서 - 페이지 13

{카테고리_이름} Galanz P180M18ASL-A0에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galanz P180M18ASL-A0 16 페이지.

standby mode and the display will show "0".



Restoring factory settings includes clearing the USB module menu data and restoring the memory

settings to the factory settings.

UTO COOK

The system has 900 auto cook menus to be selected. The default cooking power and time is "P10" and

15 minutes. You can also adjust the power and time by operating the control panel or downloading USB

module (Directly input the cooking time and power of the corresponding menu in the specific file in the

USB disk. Then connect the USB module of the control panel, download the data by pressing

corresponding button, and then complete the menu modification).

Start the auto cook menus cooking program:

In standby mode, use number buttons to select corresponding menu (001-900).

Press ENTER button to confirm.

Press START button to start.

Set menus by control panel:

In standby mode, press PROG button once.

Press ABC button repeatedly to select weight unit.

Use number buttons to set menu code (001-300).

Press PROG button once.

Press POWER button repeatedly to select power level.

Use number buttons to set cooking time. Then you can press POWER and number buttons to set

cooking power and time if you need multi-stage cooking program. You can program up to 3 cooking

sequences.

Press PROG button once to save the menu. The system will return to standby mode.

Set menus by USB module:

The file system must be "FAT32", otherwise it will not be able to download and upload menu data.

Connect the USB disk to the interface of USB module (if the connection is successful, "DE" beep will

sound; if it fails, no prompt will be given. When the USB disk is disconnected, "DEDE" beep will

sound.

In standby mode, press and hold PROG button for 4 seconds, the display shows "PROG", "

" and "

If you need to download the USB disk data, press and hold the number button 4 for a long time, if

you need to upload the computer board menu data, press and hold press the number button 5 for a

long time.

When the display shows "FH FL" , the download is completed. When the display shows "FH FU" ,

the upload is completed.

After transmission, press STOP button or no operation within 20 seconds, the system will return to

standby mode.

Set the USB module menus:

The file name used for upload is UPLOAD.CSV , the file name used for download is menufile.csv.

As shown in the chart below, the ordinate is the menu number, and the abscissa from left to right is the

first cooking program power - cooking time minutes - cooking time seconds - the second cooking

program power - cooking time minutes - cooking time seconds - the third cooking program power -