AGRITAL ISEKI TXG Series 설치 매뉴얼 및 부품 목록 - 페이지 8

{카테고리_이름} AGRITAL ISEKI TXG Series에 대한 설치 매뉴얼 및 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. AGRITAL ISEKI TXG Series 18 페이지.

On the dais unscrew the 4 screws (2 on the right and 2 on the left) as shown in PHOTO and drill

the original carpet in the holes of the screws removed.

(See photo)

Stick the adhesive gasket 5x25 under the rear cross member (total 2 meters) and lower the cabin

on the machine.

Screw the rear cabin to the hardware of the roll bar using the original nuts.

NB: Attach the bracket to its original position even handbrake.

Attach the front cabin in the holes created on the carpet of the platform, do not use the original

screws but the screws M8x40 dates supplied (4 screws).

Fix the hydraulic distributor welded to the bracket that is located on the rear cross member.

Connect the tank to the filler neck welded to the cabin via a rubber hose and nuts provided.

(See photo)