DYNANAV DynaFlight3 매뉴얼 - 페이지 8

{카테고리_이름} DYNANAV DynaFlight3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNANAV DynaFlight3 18 페이지. Aerial application guidance and management system

Control Grip or Switches

The control grip contains three primary switches that control the entire system. On our supplied

DynaGrip™, two of these switches are contained in the single 5 way Top Hat switch and the other on a

push button switch. It is the intention of the system for the pilot to have access to these switches on his grip,

cyclic or his collective or a combination of both. Other than these switches, the DynaFlight system is wired

to the IO ControlBox interface to sense spray on/off or other actions.

If the grip, cyclic or collective have a spare Top Hat switch, it can be wired directly to the connector on the

Dual Relay box along with two other push buttons for the "accept" and the "window" operation. This Dual

Relay box should always be used as it contains the transient spike protection circuitry. If the DynaGrip™-

Collective switch box is used, it should be attached to the collective such as to not interfere with the normal

operation and so the top hat can be operated with the thumb. For Fixed Wing aircraft, the supplied

DynaGrip™ is to replace the existing control grip on the flight control stick.

730 – 11731 BAYNES ROAD, PITT MEADOWS, BC, CANADA, V3Y 2B4

WEB PAGE:

www.dynanav.com

PHONE: 604-465-0009

FAX: 604-465-0084