DYNANAV DynaFlight3 매뉴얼 - 페이지 7

{카테고리_이름} DYNANAV DynaFlight3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNANAV DynaFlight3 18 페이지. Aerial application guidance and management system

◼

The display should be mounted to best suit the requirements of both the pilot and the specific

aircraft/helicopter. This should take into consideration the following:

◼

It should be in the direct view of the pilot, so as not to obstruct his view outside the aircraft.

◼

The sun shroud (used on the EL type display) should be positioned for full screen visibility for the pilot

while occluding direct sunlight on the screen. As the bottom mount can be tilted from 0 to 25 degrees to

adjust for individual pilot needs, be sure the bottom plate is mounted to allow for individual pilot needs

(tall or short).

◼

The front of the screen should be oriented to front of helicopter/aircraft to give guidance information that

relates to helicopter/aircraft flight direction.

Product features

◼

As the display represents the ground view, the display should be mounted as horizontal as possible so

as the pilot can see the complete screen. The EL display can be viewed at quite extreme angles and

can use either the tunnel sun shroud or the angled sun shroud.

◼

The connector plug is a LEMO connector that is simply pushed on (align red dots first) and simply

pulled off to remove. DO NOT TWIST!

730 – 11731 BAYNES ROAD, PITT MEADOWS, BC, CANADA, V3Y 2B4

WEB PAGE:

www.dynanav.com

PHONE: 604-465-0009

FAX: 604-465-0084