DYNANAV DynaFlight3 Manual - Page 7
Browse online or download pdf Manual for Avionics Display DYNANAV DynaFlight3. DYNANAV DynaFlight3 18 pages. Aerial application guidance and management system
Print Page
◼
The display should be mounted to best suit the requirements of both the pilot and the specific
aircraft/helicopter. This should take into consideration the following:
◼
It should be in the direct view of the pilot, so as not to obstruct his view outside the aircraft.
◼
The sun shroud (used on the EL type display) should be positioned for full screen visibility for the pilot
while occluding direct sunlight on the screen. As the bottom mount can be tilted from 0 to 25 degrees to
adjust for individual pilot needs, be sure the bottom plate is mounted to allow for individual pilot needs
(tall or short).
◼
The front of the screen should be oriented to front of helicopter/aircraft to give guidance information that
relates to helicopter/aircraft flight direction.
Product features
◼
As the display represents the ground view, the display should be mounted as horizontal as possible so
as the pilot can see the complete screen. The EL display can be viewed at quite extreme angles and
can use either the tunnel sun shroud or the angled sun shroud.
◼
The connector plug is a LEMO connector that is simply pushed on (align red dots first) and simply
pulled off to remove. DO NOT TWIST!
730 – 11731 BAYNES ROAD, PITT MEADOWS, BC, CANADA, V3Y 2B4
WEB PAGE:
www.dynanav.com
EMAIL: [email protected]
6
PHONE: 604-465-0009
FAX: 604-465-0084