dBTechnologies IA504R 빠른 시작 사용 설명서 - 페이지 2
{카테고리_이름} dBTechnologies IA504R에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dBTechnologies IA504R 4 페이지.
페이지 인쇄
IA504R
FRONT PANEL
1
2
3
REAR PANEL
8
POWER SUPPLY SPECIFICATIONS (POWER ABSORPTION)
Draw at 1/8 of full power in average use conditions (*): 0.36 A (220-240V~) - 0.66 A (100-120V~)
Draw at 1/3 of full power in average use conditions (**): 0.7 A (220-240V~) - 1.4 A (100-120V~)
Power absorption with speaker turned on without signal (idle): 0,16 A (220-240V~) - 0.25 A (100-120V~)
*INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It is
recommended to consider them the minimum sizing values, for any type of configuration.
**INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation of
the limiter. We recommend sizing according to these values in case of professional installations and tours.
Balanced analog signal
Connect the positive and negative pole, and the
ground of the input signal to the corresponding
input on the amplifier.
QUICK START USER MANUAL SECTION 1
7
4
5
9
10
INPUT SETTINGS
I/O AND CONTROL PANEL
The amplifier is controlled by a powerful DSP. All the
connections, except USB Data control, are in the rear
amplifier control panel.
1-
Remote Active LED
6
2-
Power/Standby LED
3-
Reset button
4-
Bridge Mode LED
5-
Signal LED
6-
USB Data Control
7-
Peak Fault LED
8-
Analog audio Inputs
9-
GPIO/Standby ports
10-
RDNet Data In/Data Out
11-
Power Outputs
12-
Full-range Mains Input
11
Unbalanced analog signal
Connect the positive pole and the ground of the
input signal to the corresponding input on the
amplifier.
2
420120398Q REV1.0
12