dBTechnologies IA504R Посібник користувача "Швидкий старт - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача "Швидкий старт для Підсилювач dBTechnologies IA504R. dBTechnologies IA504R 4 сторінки.

IA504R

FRONT PANEL

REAR PANEL

POWER SUPPLY SPECIFICATIONS (POWER ABSORPTION)

Draw at 1/8 of full power in average use conditions (*): 0.36 A (220-240V~) - 0.66 A (100-120V~)

Draw at 1/3 of full power in average use conditions (**): 0.7 A (220-240V~) - 1.4 A (100-120V~)

Power absorption with speaker turned on without signal (idle): 0,16 A (220-240V~) - 0.25 A (100-120V~)

*INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It is

recommended to consider them the minimum sizing values, for any type of configuration.

**INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation of

the limiter. We recommend sizing according to these values in case of professional installations and tours.

Balanced analog signal

Connect the positive and negative pole, and the

ground of the input signal to the corresponding

input on the amplifier.

QUICK START USER MANUAL SECTION 1

INPUT SETTINGS

I/O AND CONTROL PANEL

The amplifier is controlled by a powerful DSP. All the

connections, except USB Data control, are in the rear

amplifier control panel.

Remote Active LED

Power/Standby LED

Reset button

Bridge Mode LED

Signal LED

USB Data Control

Peak Fault LED

Analog audio Inputs

GPIO/Standby ports

10-

RDNet Data In/Data Out

11-

Power Outputs

12-

Full-range Mains Input

Unbalanced analog signal

Connect the positive pole and the ground of the

input signal to the corresponding input on the

amplifier.

420120398Q REV1.0