Hifonics MXS12D2 설치 매뉴얼 - 페이지 6

{카테고리_이름} Hifonics MXS12D2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifonics MXS12D2 8 페이지. High-end spl-subwoofer

ENGLISH

RECOMMENDED ENCLOSURES

Selaed Enclosure

for a dry bass response with compact dimensions:

Inner volume Vb = 35 Litres

Fill up two-thirds of the enclosure with sound proofing.

Vented Enclosure (Bassreflex) for absolute deeep bass response:

Inner volume Vb = 35 Litres

with one reflexport tube (diameter 100 mm, length 350 mm)

The exterior baffles of the enclosure must be encased with sound proofing on the

inner side. Please ensure, that no sound proofing is located between the subwoofer

and the reflexport opening.

The MXS12D2 Subwoofer is equipped with a high-capable dual-voice-coil, which

offers several conncetion options, like displayed on the following page.

Please make yourself familiar with the owner's manual of the amplifier, before you

start with the connection. Attend therfor also the minimum impedance and output

power of the amplifier.

Please note, if you chose the parallel conncetion, the subwoofer impedance will be

halved to 1 ohm. Check therefor the minimum impedance of your amplifier and if

he is 1 ohm operation stable.

If you chose the serial connection, the impedances of the voice-coils will be added,

so that no problems with the load capabilty of the amplifier are expected.

Please use only high valued speaker cables with a minimum profile section of

4,0 mm

for the wiring of the subwoofer.

NOTE: Please ensure by any means the correct polarity of all connections.

Faulty installed and connected devices may damage the amplifier and subwoofer

seriously. Please ensure by any means not to go below the minimum

impedance.

MAXXIMUS SERIES