Hifonics MXS12D2 Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Subwoofer Hifonics MXS12D2. Hifonics MXS12D2 8 stron. High-end spl-subwoofer

Hifonics MXS12D2 Instrukcja instalacji
ENGLISH

RECOMMENDED ENCLOSURES

Selaed Enclosure
for a dry bass response with compact dimensions:
Inner volume Vb = 35 Litres
Fill up two-thirds of the enclosure with sound proofing.
Vented Enclosure (Bassreflex) for absolute deeep bass response:
Inner volume Vb = 35 Litres
with one reflexport tube (diameter 100 mm, length 350 mm)
The exterior baffles of the enclosure must be encased with sound proofing on the
inner side. Please ensure, that no sound proofing is located between the subwoofer
and the reflexport opening.

CONNECTION OPTIONS

The MXS12D2 Subwoofer is equipped with a high-capable dual-voice-coil, which
offers several conncetion options, like displayed on the following page.
Please make yourself familiar with the owner's manual of the amplifier, before you
start with the connection. Attend therfor also the minimum impedance and output
power of the amplifier.
Please note, if you chose the parallel conncetion, the subwoofer impedance will be
halved to 1 ohm. Check therefor the minimum impedance of your amplifier and if
he is 1 ohm operation stable.
If you chose the serial connection, the impedances of the voice-coils will be added,
so that no problems with the load capabilty of the amplifier are expected.
Please use only high valued speaker cables with a minimum profile section of
2
4,0 mm
for the wiring of the subwoofer.
NOTE: Please ensure by any means the correct polarity of all connections.
Faulty installed and connected devices may damage the amplifier and subwoofer
seriously. Please ensure by any means not to go below the minimum
impedance.
MAXXIMUS SERIES