909 BS9 사용 설명서 - 페이지 6
{카테고리_이름} 909 BS9에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 909 BS9 16 페이지. 230mm (9") band saw
페이지 인쇄
•
Do not store materials or equipment above a machine in
such a way that they could fall into it.
•
Ensure that your work is always on the table. Never make
a cut with the work off the table.
Wear goggles
Wear hearing protection
Wear a breathing mask
Unpacking
Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Required tools
The following tools are required to assemble the band saw:
3mm Hex Key (Supplied)
•
10mm Wrench (Supplied)
•
Assembly time
The BS9 band saw will take approximately 10 minutes to
assemble.
Know your product
1. On/Off switch
2 Power On indicator
3. Work light on/off switch
4. Work light
5. Base
6. Housing door
7. Lower housing door lock
8. Upper housing door lock
9. Work table
10. Work table trunnion
11. Table insert
12. Table angle locking knob
13. Table angle adjustment knob
14. Table angle adjustable screw stop
15. Bevel scale
16. Upper blade guide
17. Blade guide height adjustment knob
18. Blade guide height adjustment lock knob
19. Blade tracking adjustment knob
20. Blade tracking locking nut
21. Blade tension knob
22. Saw blade
23. Upper blade wheel
24. Lower blade wheel (inside the cover)
25. Rip fence
26. Rip fence locking handle
27. Mitre gauge
28. Mitre gauge locking knob
29. Push stick
30. Push stick storage
31. Dust extraction port
32. 3mm Hex key
33. 10mm Wrench
6