909 PS26W 사용 설명서 - 페이지 5
{카테고리_이름} 909 PS26W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 909 PS26W 20 페이지. 26cc pole trimming saw
페이지 인쇄•
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
•
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4). Power tool use and care
•
Do not force the power tools. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn it
"on" and "off". Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
•
Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
•
Maintain power tools with care. Check for misalignment
or binding of moving parts, breakage of parts and any
other condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
•
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
•
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
5). Use and care of the battery pack
•
Ensure the key switch is in the OFF position and the
key is removed before connecting or disconnecting the
battery pack.
•
Recharging only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
•
Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk
of injury and fire.
•
Avoid contact with any liquid that is emitted by a battery.
If the battery pack is abused, liquid may escape from
the battery. Liquid emitted from the battery may cause
irritation or burns. If liquid comes into contact with the
skin, wash the area immediately with soap and water,
and then neutralize the liquid with lemon juice or vinegar.
If contact occurs, rinse thoroughly with running water. If
liquid comes into contact with the eyes, rinse thoroughly
with running water and seek medical help.
•
Store battery pack in well ventilated, dry and cool
conditions, and avoid direct sunlight and rain.
Additional safety instructions for the
inbuilt battery pack
(Applicable if you have a Key Start unit only)
•
The inbuilt battery pack for this tool has been shipped in
a low charge condition. You should charge the battery
pack fully before use.
•
To ensure the longest battery life and best battery
performance, always charge the battery when the air
temperature is between 18–24°C. Do not charge the
battery pack when the temperature is below 0°C, or above
40°C. This is important. Failure to observe this safety rule
could cause serious damage to the battery pack.
•
Do not incinerate the inbuilt battery pack even if it is
seriously damaged or can no longer hold a charge.
The battery pack can explode in a fire.
5