909 PS26W 사용 설명서 - 페이지 6
{카테고리_이름} 909 PS26W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 909 PS26W 20 페이지. 26cc pole trimming saw
페이지 인쇄•
Never attempt to open the inbuilt battery pack for any
reason. If the plastic housing of the battery pack breaks
open or cracks, immediately discontinue its use and do
not recharge it.
•
The inbuilt battery pack utilizes nickel-cadmium cells.
Cadmium is considered to be a toxic material. Use an
environmentally safe disposal unit at a municipal waste
disposal centre to dispose of a damaged or worn out
battery.
Additional safety instructions for the charger
(Applicable if you have a Key Start unit only)
•
Before using the charger, read all the instructions and
cautionary markings on the charger as well as the
instructions on using the battery pack.
•
Only charge your pole saw indoors as the charger is
designed for indoor use only.
WARNING.
•
Do not allow any liquid to come into contact
with the charger. There is a danger of electric shock.
•
To allow the appliance to cool down after charging, do
not place it in a hot environment such as a metal shed or
open trailer left in the sun.
•
The charger is not intended for any use other than
charging the exact type of rechargeable appliance as
supplied with the charger. Any other use may result in the
risk of fire, electric shock or electrocution.
•
The charger and appliance supplied with it are specifically
designed to work together. Do not attempt to charge
the battery pack with any other charger than the one
supplied.
•
Do not place any object on top of the charger as it could
cause overheating. Do not place the charger near any
heat source.
•
Do not pull on the lead of the charger to disconnect it
from the power source.
•
Make sure that the charger cable is positioned where
it will not be stepped on, tripped over or otherwise
subjected to damage or stress.
•
Do not use an extension cord unless it is absolutely
necessary. The use of an improper extension cord could
cause the risk of fire, electric shock or electrocution.
•
Do not use the charger if it has been subjected to a
heavy knock, dropped or otherwise damaged in any way.
Take the charger to an authorised service centre for a
check or repair.
•
Do not disassemble the charger. Take it to an authorised
service centre when service or repair is required.
Incorrect re-assembly may result in the risk of fire, electric
shock or electrocution.
•
To reduce the risk of an electric shock, unplug the
charger from the power supply before attempting to clean
it. Removing the charging appliance alone does not
reduce the risk.
•
Never attempt to connect two chargers together.
•
Do not store or use the tool in locations where the
temperature may reach or exceed 104°F (40°C) such as
alongside sheds or metal structures in the summer.
•
The charger is designed for use from a standard
household electrical supply (230–240 volts). Do not
attempt to connect the charger to a supply with a different
supply.
Additional safety rules for pole trimmers
For your own safety, please note the included general safety
information, and please also note these additional advices:
Always wear a helmet and safety gloves when working
•
with the pole saw.
We also recommend strongly wearing eye protection to
•
keep oil spray and sawdust out of your eyes.
Never use the pole saw while standing on a ladder.
•
Do not use the pole saw in rain.
•
Do not stand under the branch you are cutting. Branches
•
may fall without warning. Work at an angle of no more
than 60°.
6