909 12V2BLI 사용 설명서 - 페이지 10

{카테고리_이름} 909 12V2BLI에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 909 12V2BLI 20 페이지. 12v lithium drill driver

When to charge the battery

New battery packs are shipped in a low charge

condition and must be fully charged before use. It takes

approximately 8 hours to fully charge a new battery and

3 – 5 hours once the battery has been used in the tool a

few times.

Charging of batteries should not be undertaken casually.

Through the charging cycle the condition of the battery pack

should be monitored and the charge cycle turned off at

completion or at the end of the recommended time.

Due to modern mass production techniques, it is unlikely

that your 909 Power Tool is faulty or that a part is missing.

If you find anything wrong, do not operate the tool until the

parts have been replaced or the fault has been rectified.

Failure to do so could result in serious personal injury.