909 12V2BLI Kullanım Kılavuzu - Sayfa 10

Matkap 909 12V2BLI için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 909 12V2BLI 20 sayfaları. 12v lithium drill driver

When to charge the battery

New battery packs are shipped in a low charge
condition and must be fully charged before use. It takes
approximately 8 hours to fully charge a new battery and
3 – 5 hours once the battery has been used in the tool a
few times.
Charging of batteries should not be undertaken casually.
Through the charging cycle the condition of the battery pack
should be monitored and the charge cycle turned off at
completion or at the end of the recommended time.

Unpacking

Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
10