dbx Mini-Pre Vacuum Tube Microphone PreAmp 사용자 설명서 - 페이지 7

{카테고리_이름} dbx Mini-Pre Vacuum Tube Microphone PreAmp에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx Mini-Pre Vacuum Tube Microphone PreAmp 13 페이지. Vacuum tube microphone preamp

페이지 인쇄

Mini-Pre

Connections\Operation

Rear Panel Descriptions (from left to right)

Power Supply Connector

Connect the included PS 0913 power supply at this point.

Power Supply Cord Strain Relief

To prevent any untimely power supply interruptions, it is recommend that the

power supply cable be looped over the hook of the power supply cord strain relief.

XLR Output Connector

The XLR output of the Mini-Pre is balanced. The XLR output is ideal for running

from the Mini-Pre directly into the input of a XLR input of a mixing console. Note:

The XLR and 1/4" output connectors can be used simultaneously.

XLR Pin configuration: Pin 1 = Ground, Pin2 = Positive and Pin3 = Negative

1/4" Balanced TRS Output Connector

The 1/4" output connector of the Mini-Pre is impedance-balanced TRS. The 1/4"

output is ideal for running from the Mini-Pre directly into 1/4" inputs of mixing con-

soles and\or power amplifiers. Note: The XLR and 1/4" output connectors can be

used simultaneously.

XLR Input Connector

The XLR Input connector of the Mini-Pre is balanced. The XLR input is ideal for

microphone connections.

XLR Pin configuration: Pin 1 = Ground, Pin2 = Positive and Pin3 = Negative

Mini-Pre User Manual