dbx Mini-Pre Vacuum Tube Microphone PreAmp 사용자 설명서 - 페이지 9
{카테고리_이름} dbx Mini-Pre Vacuum Tube Microphone PreAmp에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx Mini-Pre Vacuum Tube Microphone PreAmp 13 페이지. Vacuum tube microphone preamp
페이지 인쇄
Mini-Pre
Connections\Operation
+48volt Switch
The +48 volt switch (pushed in) is used to supply power to any microphone that
requires +48volt phantom power.
+20dB Pad Switch
The +20dB Pad switch is used to select the desired gain range of the Mini-Pre.
When the switch is not depressed, the Mini-Pre is in normal +26 to 60dB mode.
When the +20dB Pad switch is pressed, the gain range of the Mini-Pre is +6 to
+40dB.
Phase Switch
The Phase switch of the Mini-Pre is used to adjust the phase output of the unit.
When the switch is depressed (out) the output is normal, or in phase. When the
Phase switch is engaged (pressed in), the output signal is out of phase.
Output Control -∞ to +10dB
The Output control of the Mini-Pre is used to set the overall output signal of the
Mini-Pre being sent to a receiving device. When the control knob is turned com-
pletely to the left, there is no output signal being sent to a receiving device.
Adjusting the control knob to clockwise, output signal is being increased. The
range is from -∞ to +10dB.
®
Mini-Pre User Manual
9