DYNAPAR NorthStar WIND 56 사용 설명서 - 페이지 5

{카테고리_이름} DYNAPAR NorthStar WIND 56에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNAPAR NorthStar WIND 56 12 페이지. Magnetoresistive encoder for pitch control unit applications

페이지 인쇄

1.1 General

These instructions do not claim to cover all details of variation in equipment or to provide for every possible

contingency or hazard to be met in connection with installation, operation, and service. Should further

information be desired or should particular problems arise which are not covered sufficiently for the

purchaser's purposes, please contact Dynapar., or one of its designated representatives.

1.2 Description

The NorthStar WIND56 is a modular digital encoder. This magnetoresistive encoder sensor-based unit has

been designed for fast, easy mounting onto a standard NEMA 56C motor face. The basic design philoso-

phy is as follows: The encoder frame is mounted onto the C-face flange of a motor. This positions the

sensor and contains the electronics. The magnetic pulse wheel on the motor shaft has magnetic pulses

imprinted on its outside surface. As the motor spins, the passing magnetic pulses actuate the

magnetoresistive sensor. The resulting electronic signals are processed into square wave signals by the

internal electronics.

9.45 (240.0)

7.53 (191.3)

+1.800.873.8731

©DYNAPAR

NorthStar WIND 56 Instruction Manual

2.75 (69.9)

5.50 (139.7)

Figure 1: Dimensions - inch (metric)

702820-0001 Rev. C

1.49 (37.9)

PROTECTIVE

COVER

WHEEL

Ø4.795

(121.8)

Ø5.165

Ø2.75

(131.2)

(69.9)

0.158

(4.0)

0.830

(21.1)

0.362

0.74 (18.8)

(9.2)

0.83 (21.1)

0.427

1.92 (48.8)

(10.9)

0.578

(14.7)

0.738

(18.8)

June 2012

Page 5