HIFU Ultraformer 3 매뉴얼 - 페이지 12

{카테고리_이름} HIFU Ultraformer 3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIFU Ultraformer 3 15 페이지.

6.Manufacturer's liability

The products produced shall conform to the product standards. If the products do not conform to the product

standards, the company is responsible for the replacement and return of goods.

The company shall bear the corresponding liability for personal and property damage caused by the manufacturing

defects of the products, provided that the company shall not be liable for the following situations:

The purchaser or operation user fails to use the product in accordance with the operation specification in the

instruction manual, or fails to use the product in accordance with the safety precautions and warning instructions.

Violation of regulations on transportation, installation, use, maintenance and storage of products, causing damage to

products, human life or property.

The company carries out lifelong maintenance and technical service for the products, and will repair for users free of

charge any manufacturing quality problems occurred during the stipulated quality assurance period.

When the accessories need to be replaced, the original accessories must be purchased from the company, otherwise

the user shall bear the adverse consequences.

7. Storage and transportation management

Storage: the equipment should be stored in the original packaging box, in a well-ventilated room, the

packing box should be high, the ambient temperature is -10℃~40℃, the relative humidity is not greater than

93%, not allowed to be placed in the vicinity of harmful gases, flammable, explosive substances and corrosive

gases.

Transportation: the instrument under the packing condition is suitable for highway, railway, air and water

transportation. In the process of loading, unloading and transportation, it shall prevent violent vibration and

impact, and shall not be affected by moisture, and shall not be mixed with inflammable and corrosion-prone

substances, mixed transport, specific requirements in accordance with the provisions of the order contract.

8.Use period

The warranty period of this instrument is 1 year (except for man-made damage).

The warranty period of spare parts is 3 months (except for man-made damage).

If the instrument beyond the service life continues to use, it shall be tested and approved by the engineer, and the

performance of the instrument shall be tested regularly by the engineer in the subsequent use.

Scrapped instruments and accessories that have expired should be disposed of according to local regulations.